These RacingBros Shicane's will lower your Monkey 125 rear by approximately -50MM(2Inch's)
These shocks are fully adjustable with spring pre-load , Compression and rebound.
Spherical bearings are used on the mounting ends instead of the typical bushings to get smoother operation and more precise suspension feedback.
Recommended to pair these up with Racing Bros front fork lowering kit.
Spring rate available are:
- 15.8N/mm spring: 195lbs and under rider
- 19.3N/mm spring: 190lbs- above
Features
- Low Down version 280mm/+10mm length
Super High Strength JIS G3560 Cr-Si steel spring
6061-T6 Cold Forged Damper Body
36mm 7075-T6 Full CNC Piston
14mm Super-Chrome Shaft
ROD END AND SPHERICAL BEARINGS
Spring Preload
Wide-range Low-Speed Rebound adjustment (24 clicks)
Co-Axial Hi/Lo Speed Compression Damping Adjustment (HLR) HSC (High-Speed Compression): 24 clicksLSC (Low-Speed Compression): 24 clicks
10mm Ride height adjustable
RacingBros Shicane Twin HLR Low Down 280mm Rear Shock - Honda Monkey 125
- Low Down version 280mm/+10mm length
-
Super High Strength JIS G3560 Cr-Si steel spring
-
6061-T6 Cold Forged Damper Body
-
36mm 7075-T6 Full CNC Piston
-
14mm Super-Chrome Shaft
-
ROD END AND SPHERICAL BEARINGS
-
Spring Preload
-
Wide-range Low-Speed Rebound adjustment (24 clicks)
-
Co-Axial Hi/Lo Speed Compression Damping Adjustment (HLR)
HSC (High-Speed Compression): 24 clicks
LSC (Low-Speed Compression): 24 clicks -
10mm Ride height adjustable